DV Cabinets

DV cabinets

DV blast cabinet is equipped with a front lift door with air springs, which enables the installation of the cabinet in a smaller room. Front opening door enables loading and unloading of heavier parts by a fork lifter or by a crane.

Blast DV cabinet housing is made from powder painted sheet metal and has a front lift door with air springs for easy loading of workpieces. The tilt-out window is designed for tool-free glass change in minutes and equipped with fluorescent light for best visibility. Front openings for hand access are equipped with two layers of rubber sealing flaps. Galvanized steel gratings in the working area provide the best support for even heavier parts up to 300 kg. Blasting is foot operated and interrupted by a safety switch if the door is opened.

BLAST DV cabinets can be equipped either with injector or pressure blasting system and optionally connected to dust collectors with or without cyclone for abrasive recycling.

Actual space requirement for a complete system depends on the equipment configuration, options and requested workflow. Care also about additional workspace for the operator and for maintenance access.

The DV-cabinets are available in 3 standard sizes – BLAST DV 1, 2, 3.


Blast 1 DV

Blast 2 DV

Blast 3 DV

Outside dimensions (mm)

850 x 600 x 1600

1200 x 800 x 1700

1450 x 1000 x 1800

Working area (mm)

800 x 550 x 750

1150 x 750 x 850

1400 x 950 x 950

Cabinet weight, empty




Max. workpiece weight

300 kg

300 kg

300 kg

Electrical connection

220 V, 50 Hz

BLAST DV cabinets can be optionally equipped with the rotating drum for blasting of small parts

BLAST DV cabinets can be customized with many optional accessories like:

  • 50 mm or 120 mm diameter suction connection
  • Air pressure regulator with filter
  • Blast guns type INJ 1 K, ANI or POWER GUN for injector blast system
  • Wolfram-carbide or boron carbide nozzles
  • Air pressure regulator with filter
  • Blow-off (blowing) gun
  • Blast gun holder
  • Inside rubber lining
  • Rubber/plastic blast gloves
  • Metal ring for glove attachment
  • Manual turntable VM
  • 120 mm suction connection with PU lining
  • left side door
  • openings on the doors for longer workpieces
  • carriage on rails in/out -500 kg capacity
  • additional light on the cabinet's ceiling

Common applications:

  • Remove rust, mill scale, heat treatment scale, and carbon build-up from metals
  • Strip paint, powder coating, plating, and anodizing from parts for rework
  • Eliminate burrs, parting lines, flashes, and other defects from castings and injection-molded parts
  • Remove residual sand from castings
  • Beautify steel, stainless steel, aluminum, brass and other metals with a uniform satin finish
  • Etch artwork and apply lettering on glass, stone, plastics, metal and other materials
  • Clean release agents and material build-up from moulds

How can we help you?

Please fill in the required fields in the contact form and we will be happy to provide you further information of our products. If possible, describe your need and/or intended use of the equipment so that we can provide more accurate information.

Contact Us

Please fill the required field.
Please fill the required field.

Telephone :

Fax :

+65 6280 9488

Address :

3014A Ubi Road 1, #02-06 Singapore 408703